Are you one of those people who have a deep love for the gardening and always keep your tools ready for the action? If yes, then there is a great chance that you understand how important is sharpen hand pruners in the wardrobe. A hand pruner is one of the best tools for a gardener as it can be used for trimming vines, take out tiny branches or performing similar kind of things. Furthermore, anyone can control it far better than the shears or loppers. No gardening enthusiast can deny that the best hand pruners are the one of the gentlest equipment while working on the plants.
However, they lose their sharpness after some months of continuous working that can be frustrating. It makes difficult to cut or trim the plants. If such condition arises, all you need to do is sharpen the hand pruner. There is no need to visit a specialist for this purpose as you can do this on your own.
Steps to follow for sharpening the hand pruners
There are certain things that you need to follow for successfully completing this job. We have mentioned all of them in a step by step manner for making the things easier for everyone. Check out and implement them precisely with complete safety.
Step First- Cleaning the pruners
Firstly, it is important that you should clean the pruners and eliminate the dirt from them with the help of an elbow grease, steel wool, or even a wire brush. It is all up to you as each of them can do this job wonderfully. Make sure the dirt get eliminated properly.
Step Second- Disassembling the pruners
If you are using the pruner for a long time, then you probably know that they are put together with screws and bolts. For disassembling the blades, you need to eliminate them from the pruner. There is a chance that some spring oil comes out from the tool before the blade gets disassembled. You should be kept all the parts in a single place so that problems can be avoided later.
Step Three- Checking Edges
Once you have cleaned and disassembled each part of the pruner, you have to check the beveled edges. If you own a bypass pruner, then the blade only require to be beveled from the single side, whereas the anvil pruners equip with a blade that needs to beveled from both sides.
Step Four- Sharpen the pruner using a tool
There is a great variety of tools that can be used for this job, including whetstones, diamond coated flat file, sharpening steel, and many more. Once you have selected the tool, try to use it parallel to the blade’s bevel angle. You have to press the outer edge in a single direction. You need to lift in the upward direction followed that and take the tool back to the starting point.
You have to repeat this step until the pruner gets sharpened. Always make sure the tool isn’t used in a sawing motion. If you are using an anvil pruner, then follow the same process on the other side of the blade.
Step Fifth- Lubrication and reassembling
Once you have finished the sharpening process, it is time for lubricating the pruner to prolong its life and providing protection against the rust. To do so, you need to use the oil or lubricant on the blade. It is important that there should be some lubrication when you are doing the reassembling job. If you follow our advice, then go for the white grease as it works great on the moving parts. Reassemble the pruner after lubrication and be ready for having an enjoyable gardening session.
It is important that you should maintain the health of your gardening tool and provide protection against the rust. It will not only allow them last long but make your gardening experience better and enjoyable. Sharpening hand pruner doesn’t take much time and you can do this job on your own without any difficulty. If you have a query about the hand pruner or any other gardening tool, then feel free to email us or comment below. We will try to solve your query as soon as possible.